Automation
Controls
for
Industry

Home

AC Solenoids

DC Solenoids

Contact

"We design solenoids
to meet your exact
needs or we will
modify our standard products to your requirements."

Peter Runton
Peter Runton
President

Runton Engineering, Inc.
27 Maple Avenue,
Holbrook MA 02343

Phone 781-767-0062
Fax     781-767-0064

ISO 9001 certified


 Your Leader for Actuators, Solenoids, Coils, and Replacement Parts 


 
Solenoid Selection

Solenoid Selection

Below are AC and DC power solenoid selection tables to help choose the best possible solenoid for the job. The engineer needs to pick the smallest solenoid which gives the required force, stroke and input power. Choose from the available ranges of solenoids Runton Engineering produces below and follow to the appropriate data sheet. Then select a suitable coil resistance from the Coil Selection table. This will give a part number with which to start. Contact Runton Engineering for further ordering information.

Usually there are other considerations, which are mentioned in the Application Information (Data Sheet 23). These are usually worked out between our sales engineers and the customer's engineer.


For DC Power

Force
(pounds)

Stroke
(Inches)

Watts

Dia.

Model

Data Sheet

6/0.4

0.010/0.060

10/40

0.500

4700

21

12/0.3

0.025/0.250

10/160

0.750

4630

18

19/0.06

0.025/0.400

5/160

1.000

4260

17

36/0.4

0.025/0.500

16/160

1.312

4800

22

53/0.1

0.025/0.750

10/160

1.500

4330

15

91/0.1

0.025/1.000

20/280

2.000

4430

16

100/8

0.500/1.000

50/350

3.000

4530

19

80/40

0.250/1.000

95

4X5"

4019

11


For AC Power

Stroke
(Inches)

Force At
85% V AC
(pounds)

Push
Pull

Coil
Insulation
Type

Model

Data Sheet
- Page

1/8 - 5/16

3.1 - 6.4

Push

Molded

4700

8

1/2

1.5

Pull

Cloth Wrap

6501

24-3

1/2

1.5

Push

Cloth Wrap

6502

24-4

1/2

1.5

Pull

Cloth Wrap

6503

24-5

1/2

1.5

Push

Cloth

6504

24-6

1/2

1.7

Pull

Cloth Wrap

6505

24-7

1/2

1.7

Push

Cloth Wrap

6506

24-8

1/2

3.5

Pull

Molded

6507

24-9

1/2

3.5

Push

Molded

6508

24-10

1/2

4.0

Pull

Molded

6509

24-11

1/2

4.0

Push

Molded

6510

24-12

3/4

3.5

Pull

Molded

6511

24-13

3/4

3.5

Push

Molded

6512

24-14

3/4

3.7

Pull

Molded

6513

24-15

3/4

3.7

Push

Molded

6514

24-16

 


Copyright 2008 Runton Engineering | All rights reserved | Site maintenance by OpenVine Solutions, Inc.