Automation
Controls
for
Industry

Home

AC Solenoids

DC Solenoids

Contact

"We design solenoids
to meet your exact
needs or we will
modify our standard products to your requirements."

Peter Runton
Peter Runton
President

Runton Engineering, Inc.
27 Maple Avenue,
Holbrook MA 02343

Phone 781-767-0062
Fax     781-767-0064

ISO 9001 certified


 Your Leader for Actuators, Solenoids, Coils, and Replacement Parts 


 
DC Push/Pull Solenoid 4in Dia x 5.25in 95W 60 lb (Model 4019-Data Sheet 11)
 

Industrial Solenoids and Electromechanical Devices

Model 4019

OPEN FRAME PUSH / PULL SOLENOID

 

Force Output:

40 pounds at 1" stroke
60 pounds at 1/2"' stroke
80 pounds at 1/4" stroke

Power used:

95 Watts

Voltage:

Any DC voltage, 120VDC and 230VDC Standard.

Coil resistance:

140 ohms for 120 VDC
620 ohms for 230 VDC

Weight:

30 pounds

Ambient operating temperature:

140 Degrees F

 

This solenoid is designed to operate in unprotected industrial environments for long periods of time. The coil is made up of the highest grade of insulation materials available and the solenoid can remain energized without adverse effect. The design is efficient and powerful for its size. The solenoid can push with its 3/8 Dia stainless steel push rod or it can be connected to a pull load by using the 3/8-16 tapped hole at the reverse end of the solenoid.


Copyright 2008 Runton Engineering | All rights reserved | Site maintenance by OpenVine Solutions, Inc.