Automation
Controls
for
Industry

Home

AC Solenoids

DC Solenoids

Contact

"We design solenoids
to meet your exact
needs or we will
modify our standard products to your requirements."

Peter Runton
Peter Runton
President

Runton Engineering, Inc.
27 Maple Avenue,
Holbrook MA 02343

Phone 781-767-0062
Fax     781-767-0064

ISO 9001 certified


 Your Leader for Actuators, Solenoids, Coils, and Replacement Parts 


 
AC Solenoid Model 9503 (Data Sheet 8)

Industrial Solenoids and

Electromechanical Devices

Model 9503

This solenoid is ideal for heavy duty industrial applications requiring a push type solenoid with a maximum stroke of .312 inch. It is designed to have exceptionally long life, even under the most severe conditions.

 

APPLICATION DATA

  CATALOG       STROKE     RECOMMENDED     VOLTS   CURRENT    WEIGHT
    NUMBER      INCHES     GROSS LOAD     60 HZ    AMPERES    POUNDS
                              POUNDS
 
 CR9503B103L2    1/8          4.6          115       .5        1 1/4
 CR9503B103L3                              230       .25
 CR9503B103L4                              440       .12
 
 CR9503B103M2    5/16         3.1          115       .5        1 1/4
 CR9503B103M3                              230       .25
 CR9503B103M4                              440       .12
 
 CR9503B104L2    1/8          6.4          115       .5        1 1/2
 CR9503B104L3                              230       .25
 CR9503B104L4                              440       .12
 
 CR9503B104M2    5/16         4.3          115       .5        1 1/2
 CR9503B104M3                              230       .25
 CR9503B104M4                              440       .12
 

These solenoids have long been a favorite for applications requiring the highest form of reliability, resistance to adverse environments and a long operating life. Typical applications are: valve operation , break release or operation, shaft safety stop and other, similar applications requiring long life and minimum care.

The coil is of molded construction using magnet wire rated for use at 155 Deg. C and a molded nylon bobbin which is also the plunger guide. The frame is stainless steel and the mounting base is securely welded to the solenoid laminations.


Copyright 2008 Runton Engineering | All rights reserved | Site maintenance by OpenVine Solutions, Inc.